Need a idea for rigging a gps fishfinder on my Pro Angler.

[size matters]

I am going to mount my 540S garmin color gps on my Pro Angler. I want the wires to go into the hull clean and hidden. Here is my thought. I will be putting the GPS on the Black molded piece on the right side of the hull. I want to run the wiring under it and into the side of the hull. I will then take the wiring all the way to the back hatch where a battery will be custom cut installed into the tackle box they give with the kayak in the very back hatch.

My question is I need a little larger holes to fit the plugs through the hull. My problem is the plugs are bigger than the wiring of course. I will have two of them to fit through. I want the hole then sealed and look professional after it is all wired in.

what can I do after I drill these holes and run the wires so it does not look backyard.

[Rik]

Google up rubber grommet

Those big damn plugs have been a problem for boat riggers for years

[size matters]

west marine carry anything like this? I like my stuff to look good.

[skinnywater]

Check out your local auto parts store too, thats where I got mine from.

[size matters]

I found some here at work out of a jeep that should work well. Thanks for the ideas-Ken

[jslager]

http://kayakfishinggear.com/38liquidtitefitting.aspx" onclick="window.open(this.href);return false;

Searches for wire seal or cable clam will get you other options